QOLSYS IQ PANEL Bedienungsanleitung PDF herunterladen (Seite 10)

MOUNTING INSTRUCTIONS

• Remove back cover by pressing bottom button and sliding back cover o in an upward motion.

If a ush mount is required screw in the back cover on the wall using the screw templates as shown. If

corner mount is required use the screw templates as shown.

Mounting for Pet Sensitivity

• Mount the sensor 6.5 to 7 ft (0.9 and 1.5 m) high. For best results, install the sensor higher than the

highest point the pet might reach in the detection area.

Use the following formula to calculate the optimal mount height:

mount height = pet’s stature + (distance/20).

That means when the farthest sense area to sensor is 33 ft (10 m), and the pet’s stature is 2.6 ft (0.8 m),

mount 4.25 ft (1.3m) from the oor. (Do not exceed the highest 5 ft [1.5 m]).

• If the detection area contains furniture or other objects on which the pet can climb or jump, either (a)

remove these objects, (b) mount the sensor a safe distance above these objects, or (c) mask these areas.

IQ MOTION SENSOR

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Keine Kommentare

QOLSYS IQ PANEL Bedienungsanleitung Seite 10